parameter
Main uses:
The pneumatic double position stamping machine can transfer the color pattern of sublimation, solvent ink and ink to cotton, hemp, chemical fiber, nylon and other fabrics and ceramic products. It also can be used for heat treatment of hair burning and foaming printing, and the bonding of low temperature and low pressure lining with the fabric, such as clothing, shoes and hats, etc., and also for the production of small batch handkerchiefs.
Product features:
Electronic digital display has constant temperature control and high accuracy, (+ 2 c).
The imported aluminum alloy is used for heating, and the heat conduction principle is adopted, which saves electricity, temperature is uniform and temperature coefficient is small.
Electronic digital time control, high accuracy and beautiful.
Pressure random adjustment
Operation steps
1, connect the compressor connector, open the air pressure, adjust the pressure regulator 6 to (4pB-6pB), and make the heating plate rise.
2, connect the compressor connector, open the barometric pressure, modulate the pressure gauge (4pB-6pB), and raise the heating plate.
3, power up, turn on the main switch, and the indicator will light up.
4, adjust the time and temperature required. (for details see the last page.)
5, after adjusting the temperature and time, wait for the machine to heat up.
6. After the temperature is finished, the thermometer will light a small green light.
7, the clothes are placed on the silica gel pad, then put on the hot drawing paper, (pay attention to the right and reverse side of the drawing paper) to push the table to the hot press position, press the 9 start switch, put the articles flat, put the hot drawing paper, then put the high temperature cloth, press the start switch, the stamping start, the time reverse.
8, after heating, the heating plate rises automatically, and the working surface is pulled out.
9. The perm. If the hot tear paper is cold, please wait 5-10 seconds to tear up the hot paper. If it is the hot tear hot paper, if the hot stamping is finished, please tear the ironing paper immediately.
10, after successful printing, you can turn the button 1 to the semi-automatic stop. After placing hot stamping objects, hot stamping will start automatically as long as the mobile handle 7 is above the hot stamping object. In case of emergency, you can press the button 6, stop immediately, and the emergency stop button can resume hot stamping after reset.